BMS and integrated building supervision

Home › Services › BMS and integrated building supervision

BMS: the whole building under control, from a single console

Air conditioning, lighting, consumption, access, cameras and alarms finally speak the same language. We integrate the building's systems into a single supervision platform: you see everything on a floor plan, receive only the alarms that matter and act before a problem turns into downtime.

Based in Quartu Sant'Elena · on-site work in Cagliari, its metropolitan area and all of Sardinia

What we do

BMS and integrated building supervision: from design to support

A single platform for the building's air conditioning, lighting, energy, access control, intrusion detection, video surveillance and fire alarms.

Unified supervision

Interactive floor plans by building, floor and room, with the real-time status of every system from a control room, PC or tablet.

HVAC and comfort

Heating plants, air handling units, fan coils and zone control, with time schedules and set-points always under control.

Energy and consumption

Metering of electricity, heat and water, consumption analysis and regular reports to spot and reduce waste.

Access control

Badges, gates and doors integrated into the supervision: who enters, where and when, with remote opening and locking and an event history.

Fire and smoke detection

Panel status, alarms and faults shown on the floor plan, with the cross-system scenarios defined by the fire protection design.

Video surveillance and intrusion

When an alarm goes off, the camera covering the area appears automatically: the operator sees what is happening at once and the event is recorded.

From A to Z

From system survey to control room

A BMS works when it starts from a clear plan: what to supervise, who should receive which alarms and which automations are truly needed.

  1. 01

    System survey

    Existing plants, panels and subsystems, communication protocols (BACnet, Modbus, KNX, OPC and dry contacts) and the state of the network.

  2. 02

    Goals and priorities

    What to see and what to control, which alarms to send and to whom, which reports maintenance and management need.

  3. 03

    Architecture and network

    Supervision server, a building systems network kept separate from the office network, and protected remote access.

  4. 04

    Subsystem integration

    Connecting HVAC, energy, access control, intrusion, video and fire detection, directly or through dedicated gateways.

  5. 05

    Graphics and floor plans

    Pages by building, floor and room, system diagrams with colours and icons that are easy to read at a glance.

  6. 06

    Alarms and guided procedures

    Priorities, notifications and step-by-step instructions for the operator, with cross-system automations agreed with designers and managers.

  7. 07

    Testing and training

    Point-by-point testing of signals and commands, an operating manual and training for the staff who will use the platform.

  8. 08

    Support and evolution

    Maintenance, updates, integration of new systems and energy reports over time.

BMS and integrated building supervision
Who it is for

Tailored solutions for every environment

Every project starts with a site survey: spaces, users, existing systems and goals. We often work with:

Healthcare facilitiesOffices and headquartersPublic bodiesHotels and hospitalitySchools and universitiesIndustry and logistics
  • A clear proposal with materials, timing and costs
  • Tidy work and full documentation
  • Support with tickets and remote assistance
Where we work

BMS and integrated building supervision in Cagliari and Sardinia

Our office is in Quartu Sant'Elena, right next to Cagliari: we work for companies, public bodies and facilities in Cagliari, across its metropolitan area and throughout Sardinia. Every project starts with an on-site survey; after installation, support continues with tickets, remote assistance and on-site visits.

CagliariQuartu Sant'ElenaSelargiusQuartucciuMonserratoSestuElmasAsseminiCapoterraDecimomannuSinnaiMaracalagonisPulaVillasimius
FAQ

BMS and integrated building supervision: common questions

What is a BMS and what is it for?

A Building Management System is a supervision platform that brings the building's systems (HVAC, lighting, energy, access, security and alarms) together in a single interface, so you can see them, control them and receive alerts in one place instead of many separate systems.

Can systems from different manufacturers that are already installed be integrated?

Often yes: supervision platforms communicate with the most common protocols such as BACnet, Modbus, KNX and OPC. During the survey we check what can be integrated directly and what needs a gateway.

Does the BMS replace the fire alarm panel?

No: fire detection remains an independent system, compliant with regulations and maintained by licensed contractors. The BMS shows its status and alarms on the floor plan and coordinates the other systems according to the logic defined in the fire protection design.

Can it be managed remotely?

Yes, with access protected by VPN and multi-factor authentication; the building systems network stays separate from the office network.

How much energy can be saved?

It depends on the building: time schedules, zone control and consumption analysis help identify and reduce waste. After the survey we show you where there is real room for improvement.

Do you also work outside Cagliari?

Yes. Our office is in Quartu Sant'Elena, right next to Cagliari: we work in Cagliari and its metropolitan area and organise site surveys, installations and support throughout Sardinia, including Sassari, Olbia, Nuoro, Oristano. Support also continues remotely with tickets and remote assistance.

Let's talk about your project

A site survey with no obligation to understand your spaces, needs and existing systems.

Call Site survey

We'll call you back

Leave your name and number: we will call you during office hours to understand what you need, with no obligation.